Skip to content

Materials that survive sauna heat: cases, glass and seals

Last checked November 16, 2026

A sauna gauge has a few outer parts: the case or frame, a clear cover over the face, and sometimes a rim. Each one has to stand up to the room. Makers describe their choices in plain terms, and those descriptions are the only reliable guide to what a model is made of.

Cases and frames

Wood shows up often in the maker pages this site has saved. TFA lists a thermo-hygrometer with a frame made of oiled oak.1 Another TFA model has a solid wooden frame.2

Harvia describes one of its gauges as embedded in light wood. The same page lists the use environment as an interior wet area.3

Metal appears too. A discontinued Harvia thermo-hygrometer lists metal as its main material and describes a steel edge.4

Covers and glass

A clear cover keeps steam and splashes off the pointer. One TFA model is listed with a glass cover and a durable housing made of polycarbonate.5

Not every plastic is meant for heat. A food-safety guide from North Dakota State University warns against leaving thermometers with plastic lens covers in foods during cooking.6 That page covers kitchen tools, not saunas. It does show why a maker's statement matters. A plastic cover that's fine on a kitchen counter may not suit a hot room.

What makers say about heat

Makers use general words. TFA lists heat-resistant materials among the highlights on each of its three sauna pages above.125 None of those pages gives a maximum temperature, so "heat-resistant" is a label, not a number.

Harvia's sensor page goes a step further for a heater part. It says the plastic housing can be painted with heat-resistant paint, as long as air circulation isn't obstructed.7 That's a rule for one control sensor, not for a wall gauge.

Maker and model Material the page names Heat wording
TFA oak frame model Oiled oak Heat-resistant materials
TFA wooden frame model Solid wood Heat-resistant materials
TFA polycarbonate model Glass and polycarbonate Heat-resistant materials
Harvia wood model Light wood Interior, wet area
Harvia steel-edge model Metal, steel edge No heat wording on the page
The parts of a wall gaugeCase or frameFace and pointerClear coverWall fixing
Each part has its own material.

What the saved pages don't say

Seals are not covered. None of the maker pages saved here describes gaskets or seals, so this site can't say how a gauge keeps steam out. They don't state a lifespan either.

When you shop for or inspect a gauge, the model's own page and manual are the places to read. Look for a stated maximum temperature, the use environment, and the materials. Where the manual says to avoid something, follow it.

For what a gauge's printed temperature scale means, read reading the temperature range on a sauna gauge.

Reference list

  1. Analogue sauna thermo-hygrometer with oak frame, TFA Dostmann
  2. Analogue sauna thermo-hygrometer with wooden frame, TFA Dostmann
  3. Harvia thermo-hygrometer SAS92300, Harvia
  4. Harvia thermo-hygrometer A-210-THS black, Harvia
  5. Analogue sauna thermo-hygrometer 40.1055.50, TFA Dostmann
  6. Keep Hot Foods Hot and Cold Foods Cold: A Foodservice Guide to Thermometers and Safe Temperatures (FN712), North Dakota State University Extension
  7. Harvia temperature sensor 125 Celsius without cable (SP248), Harvia