Reading the temperature range on a sauna gauge
A gauge's range is the lowest and highest number on its scale. The range is printed on the face or listed on the maker's page. A gauge can only report numbers that its scale includes, so the scale should cover the heat the room will reach.
What temperatures are normal
Sauna styles differ, so no single number fits every room. A general reference, Wikipedia, says a sauna session can be a social affair, in temperatures typically between 70 and 100 degrees Celsius (158 to 212 degrees Fahrenheit).1
Local styles change that. The page describes the contemporary Baltic sauna as varying with personal preference but typically around 55 to 70 degrees Celsius (131 to 158 Fahrenheit). Dry air saunas are described at 80 to 110 degrees Celsius (176 to 230 Fahrenheit).1
Those figures are descriptions of customs, not instructions. The right setting for a particular heater comes from the heater maker's manual.
Reading a printed range
Dials often print two scales, Celsius and Fahrenheit, on one face. Read the one you know. Don't mix them up when you compare against a manual.
Makers publish ranges for ordinary tools too, and they vary widely. A university extension guide, for example, lists a temperature range from 0 to 220 degrees Fahrenheit (minus 18 to 105 Celsius) for a bimetal stemmed food thermometer.2 That's a kitchen tool, not a sauna gauge. The example only shows that each design has its own stated limits, and that a range is a fact printed by the maker.
Gauge limits and heater limits are different things
A wall gauge only displays. It doesn't switch anything off. A heater has its own sensor, and that sensor can have a safety job.
Harvia lists one control sensor that includes resettable overheat protection (125 Celsius). Harvia calls the temperature sensor a safety-monitoring component and says only the correct sensor may be used.3 A different Harvia sensor, made for its Senlog control cabinets, is described with 150 degrees Celsius overheating protection (thermal fuse).4
Two things follow from that. First, the numbers belong to those parts, not to wall gauges. Second, the sensor type depends on the heater, which is why Harvia says to check the heater's operating instructions for the correct sensor.3
Don't swap a heater's sensor for a different part, and don't treat a wall gauge as a safety device. Any work on a hard-wired heater or its controls needs a licensed electrician. Clearances and temperature limits come from the heater maker's own manual.
Exceptions
A gauge's page may not mention heater limits at all. The heater's own manual is the place to look for them. Installation rules can also differ by country, so check your local requirements and the maker's page for the model you own.
A gauge that doesn't match a second one is covered under gauge gaps. For what a gauge is made of, see materials that survive sauna heat.
Reference list
- Sauna, Wikipedia
- Keep Hot Foods Hot and Cold Foods Cold: A Foodservice Guide to Thermometers and Safe Temperatures (FN712), North Dakota State University Extension
- Harvia temperature sensor 125 Celsius without cable (SP248), Harvia
- Harvia temperature sensor 150 Celsius limiter with cable (SP172), Harvia