Materials that survive sauna heat: cases, glass and seals
A sauna gauge has a few outer parts: the case or frame, a clear cover over the face, and sometimes a rim. Each one has to stand up to the room. Makers describe their choices in plain terms, and those descriptions are the only reliable guide to what a model is made of.
Cases and frames
Wood shows up often in the maker pages this site has saved. TFA lists a thermo-hygrometer with a frame made of oiled oak.1 Another TFA model has a solid wooden frame.2
Harvia describes one of its gauges as embedded in light wood. The same page lists the use environment as an interior wet area.3
Metal appears too. A discontinued Harvia thermo-hygrometer lists metal as its main material and describes a steel edge.4
Covers and glass
A clear cover keeps steam and splashes off the pointer. One TFA model is listed with a glass cover and a durable housing made of polycarbonate.5
Not every plastic is meant for heat. A food-safety guide from North Dakota State University warns against leaving thermometers with plastic lens covers in foods during cooking.6 That page covers kitchen tools, not saunas. It does show why a maker's statement matters. A plastic cover that's fine on a kitchen counter may not suit a hot room.
What makers say about heat
Makers use general words. TFA lists heat-resistant materials among the highlights on each of its three sauna pages above.125 None of those pages gives a maximum temperature, so "heat-resistant" is a label, not a number.
Harvia's sensor page goes a step further for a heater part. It says the plastic housing can be painted with heat-resistant paint, as long as air circulation isn't obstructed.7 That's a rule for one control sensor, not for a wall gauge.
| Maker and model | Material the page names | Heat wording |
|---|---|---|
| TFA oak frame model | Oiled oak | Heat-resistant materials |
| TFA wooden frame model | Solid wood | Heat-resistant materials |
| TFA polycarbonate model | Glass and polycarbonate | Heat-resistant materials |
| Harvia wood model | Light wood | Interior, wet area |
| Harvia steel-edge model | Metal, steel edge | No heat wording on the page |
What the saved pages don't say
Seals are not covered. None of the maker pages saved here describes gaskets or seals, so this site can't say how a gauge keeps steam out. They don't state a lifespan either.
When you shop for or inspect a gauge, the model's own page and manual are the places to read. Look for a stated maximum temperature, the use environment, and the materials. Where the manual says to avoid something, follow it.
For what a gauge's printed temperature scale means, read reading the temperature range on a sauna gauge.
Reference list
- Analogue sauna thermo-hygrometer with oak frame, TFA Dostmann
- Analogue sauna thermo-hygrometer with wooden frame, TFA Dostmann
- Harvia thermo-hygrometer SAS92300, Harvia
- Harvia thermo-hygrometer A-210-THS black, Harvia
- Analogue sauna thermo-hygrometer 40.1055.50, TFA Dostmann
- Keep Hot Foods Hot and Cold Foods Cold: A Foodservice Guide to Thermometers and Safe Temperatures (FN712), North Dakota State University Extension
- Harvia temperature sensor 125 Celsius without cable (SP248), Harvia